Automation factors for assembly and handling place particularly high demands on reliability, robustness and precision. Most important are compressed air and vacuum, which must be supplied to the grippers and tools without interference. Our high-quality metal connection components are ideally suited for these demanding applications.


The robust standard components for pneumatics in industry and engineering offer an enormous variety of shapes.

  • Leakage-free and fail-safe even under difficult ambient conditions.
  • Suitable for pressures from -0.95 to 24 bar, depending on design
  • Application safety
  • Easy disconnection and connection without leakage even after long periods of operation
  • Large selection of special seals and hoses
  • Wide range of designs, e.g. straight, angle, double or T-connections


Corrosion-resistant stainless-steel push-in fittings for demanding service conditions and operating media.

  • Use of stainless steel 1.4301/07 and on request 1.4404
  • Suitable for pressures from 0 to 25 bar
  • Wide range of high-quality sealing materials from Viton and FDA-compliant low-temperature seals made of FKM can be used
  • Outer diameters up to 22 millimeters allow problem-free conveying with sufficient pressure


High-quality brass, aluminum and stainless-steel connections for closed and open cooling water applications. They are resistant to higher temperatures, aggressive aqueous media and many other substances. The full nominal size inside the fitting ensures high flow rates.